Gledopto 5-in-1 LED Driver 144W / 3A per channel GL-C-002P

Gledopto 5in1 Zigbee RGB/ CCT/ RGBW/ W smart home dimmer controller, DC 5 - 24V, Zigbee 3.0 protocol

Gledopto 5-in-1 LED Driver 144W / 3A per channel GL-C-002P

Ideal for Home Assistant with ZHA or zigbee2mqtt (zigbee dongle required) or via Tuya addon (Tuya hub required) - tested and fully working.

ZigBee 3.0- compatible with devices such as Philips Hue®, Osram Lightify®, Amazon Echo Plus as well as MiLight RGBCCT remote controls / wall switches, SmartThings. 

• "Mini" control unit for ZigBee 3.0 / MiLight lighting control.
• 5in1 - single color, CCT, RGB, RGBW, RGBCCT lighting
• Voltages 5VDC / 12VDC / 24VDC up to 144 watts of power
• Frequency adjustable between 600 and 8000 Hz
• Switch-on behavior can be determined (fixed or last setting)
• Supports mobile application operation (i.e. Tuya, SmartLife etc)

This controller provides a control for various externally controllable LED products in one.
You can use this controller to control the latest generation of LED strips with 5in1 chips, 4 chip, CCT or single color. So you can connect any LED lighting with 5V-12V-24VDC and set the controller accordingly and be more flexible. If you change your mind later or operate the device with a different lighting, just reset the color range and you don't need another or new controller.

This controller can be used to control all common types of LED products that operate on a 5V-12V-24 Volt basis. This makes it suitable for LED strips, LED recessed spotlights, LED outdoor or pool lighting.

The controller is compatible with most ZigBee ZLL and ZigBee 3.0 gateways.
It was tested with Philips Hue®, Osram Lighify®, Amazon Echo Plus.

Cable cross section for input and output 0.205-0.823mm² or AWG24-18.

Maximum power at max. 3 A per channel / 6A on all channels (with 24V LEDs it's 144 Watts in total)

At 24VDC you can operate a maximum of 144W at the control unit,
at 12VDC max. 72 Watt and at 5VDC max. 30W.

 Dimensions: 70 x 36 x 10 mm